Read Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man123) Technical Bulletin online
CCE- 1019R
[Description]
No. Item
Details
1 UI
The feature that the [X] keys indicating the determination of the setting can be
changed to the [OK] keys has been added to the SOFT SW.
* As for the [X] keys indicating [Cancel] and [Close], no change has been made.
SIM55-3 SW No. 28 Data 7
0: Disable
1: Enable (Default)
changed to the [OK] keys has been added to the SOFT SW.
* As for the [X] keys indicating [Cancel] and [Close], no change has been made.
SIM55-3 SW No. 28 Data 7
0: Disable
1: Enable (Default)
2 UI
The feature not to use the [Multi Shot], [Pamphlet] functions when reprinting the
print data stored using the retention function has been added to the SOFT SW.
SIM55-3 SW No. 28 Data 6
0: Disable (Default)
1: Enable
print data stored using the retention function has been added to the SOFT SW.
SIM55-3 SW No. 28 Data 6
0: Disable (Default)
1: Enable
3 UI
Only when the destination is just one, the feature that the address and the scan
condition can be retained for a certain period of time with the Scan To Desktop
function has been added to the SOFT SW.
SIM55-3 SW No. 27 Data 8
0: Disable (Default)
1: Enable
condition can be retained for a certain period of time with the Scan To Desktop
function has been added to the SOFT SW.
SIM55-3 SW No. 27 Data 8
0: Disable (Default)
1: Enable
4 UI
When specifying the [Envelop] as the paper type for the bypass tray, the feature
that the screen will automatically be changed to the size tab screen has been
added to the SOFT SW.
SIM55-3 SW No. 28 Data 4
0: Disable (Default)
1: Enable
that the screen will automatically be changed to the size tab screen has been
added to the SOFT SW.
SIM55-3 SW No. 28 Data 4
0: Disable (Default)
1: Enable
5 UI
When detecting the Legal sized original with the scan function, the feature that the
setting value of "Image Orientation" of the original screen will automatically be set
to the short edge being placed to the leading edge side has been added to the
SOFT SW.
(If the setting is manually switched by the user, that manual setting will be
prioritized.)
SIM55-3 SW No. 28 Data 5
0: Disable (Other)
1: Enable (USA/CANADA)
setting value of "Image Orientation" of the original screen will automatically be set
to the short edge being placed to the leading edge side has been added to the
SOFT SW.
(If the setting is manually switched by the user, that manual setting will be
prioritized.)
SIM55-3 SW No. 28 Data 5
0: Disable (Other)
1: Enable (USA/CANADA)
6 UI
Modification has been made to operate as the setting of "Display Action Panel as
default" also on the "Job Status Screen".
default" also on the "Job Status Screen".
7 UI
The design of the tab being selected on the setting screen has been changed to
make it easier to understand that it is the selected tab.
make it easier to understand that it is the selected tab.
8 UI
Modification has been made to change the screen automatically to the concerned
job mode if the registered job mode is only one type when the shortcuts are set up
for Program (only in Image Send mode)/Contacts/Group on Home screen.
job mode if the registered job mode is only one type when the shortcuts are set up
for Program (only in Image Send mode)/Contacts/Group on Home screen.
9 UI
Modification has been made to display the following message prompting for the
service call as below if the icon displayed in the system area is pressed when the
IC card reader connection trouble occurs.
"IC card reader is not recognized. Check the connection of IC card reader. If the
problem cannot be fixed, call for service"
service call as below if the icon displayed in the system area is pressed when the
IC card reader connection trouble occurs.
"IC card reader is not recognized. Check the connection of IC card reader. If the
problem cannot be fixed, call for service"
10 UI
If the paper types/paper sizes that could not be output as the offset was selected
when setting up the Offset, it used to be that "The paper in the selected tray
cannot be used for the selected mode" message would be displayed and the
resume print was blocked as a specification. Now it has been modified to clear the
offset processing automatically when executing the job. (no message is displayed)
when setting up the Offset, it used to be that "The paper in the selected tray
cannot be used for the selected mode" message would be displayed and the
resume print was blocked as a specification. Now it has been modified to clear the
offset processing automatically when executing the job. (no message is displayed)
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man123) service manuals if exist.