MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man38). Installation Manual-(Complete Manual) - Sharp Copying Equipment Service Manual (repair manual). Page 104

MX-4100N  MX-AMX2  21 – 1

MX-4100N

Service Manual

 

<Note before installation>
* To enable the external account kit, the product key must be

acquired.

To enable the Application Communication Module, enter the prod-
uct key by key operations on the operation panel.
1)

Press the [SYSTEM SETTINGS] key.

2)

Touch the [Admin Password] key.

3)

Touch the [Password] key and enter the administrator pass-
word.

4)

Touch the [OK] key.

5)

Touch the [Product Key] key.
You may have to scroll down the screen to show this key.

6)

Touch the [Application Communication Module] key.

7)

Enter the product key with the 10-key, and touch [OK] key.

• The product key can be entered from the Web page. 

For details, refer to [HELP] on the right upper side of the Web
page.

1)

By the procedure of A., "OSA setting" key is added to the
menu screen of the system setting or the key operator pro-
gram.

2)

When "OSA setting" key is touched, the menu below is dis-
played.

3)

When the [Default Display Setting] key is touched, the screen
for setting the default display that appears when the [DOCU-
MENT FILING] key is pressed will appear.
• To set the base screen of document filing as the default dis-

play, touch the [Document Filing] key.

• To set the external application selection screen as the

default display, touch the [OSA] key.

4)

After selecting the setting, touch the [OK] key.
• "Default Display Setting" also appears in "Document Filing

Settings" in the system settings (administrator).

• If the [CA] key is pressed in document filing mode or OSA

mode, the base screen of that mode will appear regardless
of the default display setting.

1)

Click the [Login] button that appears in the upper right-hand
corner of the Web page.

2)

Select [Administrator] in [Login Name] and then enter your
password.

3)

Click  [External Applications Setup] in the menu frame.

4)

Configure the standard application settings.
• Up to 8 standard applications can be stored.
• For each setting item, refer to [Help].

There are three methods to select an external application which is
set on the Web screen of the copier:
The method to select on the basic menu of each mode, the method
to select in the document filing mode, and the method to select with
the function expansion key.

1)

Touch the OSA icon.
* When no external application is registered on the Web

screen, it cannot be touched.

2)

(When two or more external applications are registered on the
Web screen)
Select an external application.
* If only one external application is registered on the Web

screen, it is not required to perform this procedure.

3)

The machine connects to the external application.
• The message "Connecting to the external application

server." appears while the machine communicates with the
standard application.

1

CD-ROM

1

2

Operation manual

1

3

Product key sheet

1

1

2

3

App 01

App 02

App 03

App 04

1/2