MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man166). HEATER KIT MOUNTING PROCEDURES - Sharp Copying Equipment Technical Bulletin (repair manual). Page 16

9) Demount the AC cord mounting plate (120V series) and inlet mounting plate (230V series). (Two screws) 
 

 
10) Pass the body heater harness turned to the rear frame side in procedure (7) through the wire saddle. 
 
11) Bundle the heater harness and AC-DCWH harness with an Omega lock (LHLDW1334FCZZ). 
 
12) Connect the heater harness to the WH PWB UN. 
 

 
13) Mount the AC cord mounting plate (120V series) and inlet mounting plate (230V series). (Reversal of 

demounting in procedure (9)) 

* Engagement with wires must not occur during the plate mounting. 

 
14) Close the rear cabinet. (11 screws) (Reversal of removal in procedure (8)) 

 

Sharp Electronics (UK) Ltd., Technical Services Group

CCE-620