Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man127) Technical Bulletin online
[Description]
No. Subject
Description
1 OSA3.5
support
Support for OSA3.5 has been added.
2
Software switch-
related
related
The following settings have been added to the FAX software SW.
- SW66-1: When receiving from the internet FAX, the size is selectable.
1: Complies with SW66-5
0: Complies with SW62-4, 5 (default)
- SW66-5: When receiving from the internet FAX, B4 size is selectable.
1: Do no select B4
0: Select B4 (default)
* When you want to print a received I-FAX to only B4, use the following settings in FAX
software SW.
SW66-1: [1]
SW66-5: [0]
When you want to switch conventional paper selection switch (through SW62-4, 5) when
printing a received I-Fax, use the following setting in FAX software SW.
printing a received I-Fax, use the following setting in FAX software SW.
SW66-1: [0]
Or,
SW66-1: [1]
SW66-5: [1]
3 Printer-related
Data after the EOI (End of Image) marker in JPEG data of the pasted image may not be
printed because a PCL-XL error occurs as incorrect data. This glitch has been corrected
so that data after the EOI marker is ignored.
printed because a PCL-XL error occurs as incorrect data. This glitch has been corrected
so that data after the EOI marker is ignored.
4 Printer-related
When outputting data with images in QuarkXPress, parts of the image would be corrupted
and lines would be erased upon printing. This glitch has been corrected.
and lines would be erased upon printing. This glitch has been corrected.
5 Printer-related
When printing directly from USB and the insufficient memory error was displayed, the
Notice Page text was incorrect. This has been corrected.
Notice Page text was incorrect. This has been corrected.
[Before correction]
A field in the TIFF file is not supported. The print job has been cancelled.
[After correction]
There is insufficient memory. Printing has been interrupted.
6 Printer-related
When printing documents with both horizontal and vertical data from the PCL5 in a non-
Windows environment, the horizontal data would not be printed in the correct direction.
This glitch has been corrected.
Windows environment, the horizontal data would not be printed in the correct direction.
This glitch has been corrected.
7 Printer-related
When using a print macro of the PCL5, characters and images would not output in the
specified colour. This glitch has been corrected.
specified colour. This glitch has been corrected.
8 Printer-related
Regarding the USTATUS DEVICE command (server-side), there have been cases where
the MFP does not send the correct command and, as a result, the same data would be re-
printed. This glitch has been corrected.
the MFP does not send the correct command and, as a result, the same data would be re-
printed. This glitch has been corrected.
9 Printer-related
If a page with a large amount of characters was printed through PCL5, the print speed
would become slower based on the number of characters printed. This glitch has been
corrected.
would become slower based on the number of characters printed. This glitch has been
corrected.
10 OSA
related
Regarding OSA external authentication, when the server load is too high, an
authentication error occurs and the print job cannot be completed. This glitch has been
corrected.
authentication error occurs and the print job cannot be completed. This glitch has been
corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-740
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man127) service manuals if exist.