Read Sharp LC-30HV4E (serv.man47) Technical Bulletin online
EEL302
Sharp Electronics (UK) Ltd., Technical Services Group
Model
LC-30HV4E (serial number: 311112~311987 and 711112~711777
for U.K
for U.K )
Description
T
h
e
h
e
p
r
o
d
u
c
t
i
o
n
r
o
d
u
c
t
i
o
n
o
f
f
The production of the P panel had been discontinued. Since the November 2003
production, the V panel is used instead. Accordingly, we have been supplying the V panel
as service part.
Note that if the V panel is employed to an old P-panel-equipped product, some other parts
must also be replaced. In such case, follow the instructions below.
The marked label is put on the model label of the set used V panel.(see page 2)
<Procedure in the field and servicing>
When the above V type panel is newly fitted in at servicing, take the following points.
production, the V panel is used instead. Accordingly, we have been supplying the V panel
as service part.
Note that if the V panel is employed to an old P-panel-equipped product, some other parts
must also be replaced. In such case, follow the instructions below.
The marked label is put on the model label of the set used V panel.(see page 2)
<Procedure in the field and servicing>
When the above V type panel is newly fitted in at servicing, take the following points.
•
Change the gradation voltage and QS drive threshold: Modify the EEPROM IC2003 data,
1~
3) (How to change the settings is
referred to in the Service Manual.)
•
Replace the existing QS drive device (IC4704/4904) with the above new one.
•
Replace the four optical sheets.
•
Finally make the video adjustment that is common after the panel has been replaced.
CHANGE OF PARTS
TECHNICAL BULLETIN
Date:
08 June 2004
Model: LC30HV4E
Ref.:
Ref.:
002
Colour: White
Page:
Page:
1 of 5
EEL302
Sharp Electronics (UK) Ltd., Technical Services Group
EEL302
Sharp Electronics (UK) Ltd., Technical Services Group
EEL302
Sharp Electronics (UK) Ltd., Technical Services Group