Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual online
MX-4070N MX-FN31 (SADDLE STITCH FINISHER) 14 – 4
D. Connection of the finisher to the main unit
1)
Fit the pin of the connection guide plate into the positioning hole of
the finisher.
the finisher.
E. Check of the height of the main unit and the
finisher
1)
Check that the hole on the protrusion of the connection guide
plate is located between the marking lines of the protrusion of the
finisher.
plate is located between the marking lines of the protrusion of the
finisher.
*If the hole is not located between the marking lines, perform the
height/skew adjustment.
height/skew adjustment.
F. Height/skew adjustment
1)
Open the front cover.
2)
Unscrew the screw (x1) and remove the wrench.
3)
Turn the fixing nut of the caster in the direction of the arrow as
shown with the wrench, and then loosen it.
shown with the wrench, and then loosen it.
4)
When adjusting the height, make adjustment at 4casters shown in
the picture.
the picture.
Adjust the height of the adjusting nut of the caster by turning it in
the direction of the arrow as shown. (When turning the adjusting
nut 360-degree, the height of the finisher changes about
1.75mm.)
the direction of the arrow as shown. (When turning the adjusting
nut 360-degree, the height of the finisher changes about
1.75mm.)
*For heightening the finisher: Turn the nut in [A] direction.
*For lowering the finisher: Turn the nut in [B] direction.
5)
When adjusting the skew, make adjustment at 2casters shown in
the picture.
the picture.
Adjust the skew of the adjusting nut of the caster by turning it in
the direction of the arrows as shown.
the direction of the arrows as shown.
*For skewing the finisher to the right side: Turn the nut in [A] direc-
tion.
tion.
*For skewing the finisher to the left side: Turn the nut in [B] direc-
tion.
tion.
Marking Line
Screw
[B]
[B]
[B]
[B]
[B]
[A]
[A]
[A]
[B]
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.