Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual online
MX-4070N MX-FN31 (SADDLE STITCH FINISHER) 14 – 3
2. Installation
Check the firmware version.
If the firmware version is old, update the firmware.
Before starting the installation work, be sure to turn OFF the power
switch of the operation panel and the main power switch on the main
unit, and remove the power plug from the socket.
switch of the operation panel and the main power switch on the main
unit, and remove the power plug from the socket.
Check that the data lamp of the operation panel is not lit or blinking
before the installation work.
before the installation work.
A. Preparation on the main unit
1)
Install the connection guide plate (Packed item No1.) with the
screws (x4) (Packed items No.5 M4x14 S- tight).
screws (x4) (Packed items No.5 M4x14 S- tight).
2)
Insert the rib of the interface pass guide (Packed item No.2) into
the hole of the main unit, and install it with the screw (Packed item
No.6 M3x6 S- tight).
the hole of the main unit, and install it with the screw (Packed item
No.6 M3x6 S- tight).
B. Installation of the earth plate
1)
Install the earth plate (Packed items No.3) with the screws (x2)
(Packed item No.6 M3x6).
(Packed item No.6 M3x6).
C. Installation of the stapler unit staple case
1)
Open the front cover. Install the stapler unit staple case (Packed
item No.4) into the stapler unit.
item No.4) into the stapler unit.
NOTE: The staple unit cannot be fixed if the power is OFF. When
installing the stapler unit staple case, insert it while holding it
so that the stapler unit cannot go deep inside.
so that the stapler unit cannot go deep inside.
A
B
C
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.