Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man188) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2) Change of the harness length / Addition of the clamp
(3) Design change of Front cover
After change
Before change
Add the clamp to the hole that the snap
band is no longer used.
band is no longer used.
Length of CABLE_REAR PASS 2_UNIT_S
Before change: 210mm
After change: 215mm
Before change: 210mm
After change: 215mm
Cable tie disused
Snap band disused
Before change
After change
Chamfering (Red section)
Length of CABLE_REAR PASS_UNIT_S
Before change: 120mm
After change: 110mm
Before change: 120mm
After change: 110mm
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man188) service manuals if exist.