Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man133) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
15
Main unit
control
Correction of E7-03 error or failure to start-up MFP。
○
○
○
○
16
Main unit
control
Correction of high temperature offset on B4/B5 size paper with Plain Paper
Weight Setting 90 g/m² - 105g g/m²(23+~28lbs
’)
Plain Paper Weight Settings
System Settings > Common Settings > Device Control
NA
NA
○
○
17
Main unit
control
Change of judgement conditions to execute auto cleaning for main charger
The purpose of this change is to remedy uneven charge under low humidity
environment
NA
NA
○
○
18
Main unit
control
Correction of L4-19
The error due to toner waste buildup caused by the failure to detect waste
toner box full has been fixed.
○
○
○
○
19
Main unit
control
Change of heater lamp control
This is to adjust to the fluorescent which flickers during fluctuation of
voltage.
○
○
○
○
20
Main unit
control
Remedy of overtoning and toner dispersion due to replenishment of excess
amount of toner
○
○
○
○
21
Main unit
control
Correction of C1-01/03/05/07 trouble during MC cleaning under HH
environment
NA
NA
○
○
22
Main unit
control
Correction of false detection of F2-22 (Discharge lamp trouble (K))
The trouble may occur while the job in monochrome mode (which tends to
trigger the execution of process control for BK) is mainly running.
NA
NA
○
○
23
Main unit
control
Correction of F2-65 trouble
This trouble may occur if the MFP is runs out of toner during continuous
run, failing to replenish the toner properly.
NA
NA
○
○
24
Main unit
control
Correction of failure to recognize original
The problem may occur if an OC cover is opened and closed too quickly
after placing an original on the table, failing to detect original size.
○
○
○
○
25
Main unit
control
Correction of machine lockup
The lockup may occur while scanning non standard size originals (with 235
mm in width) on RSPF, displaying “Originals are being read”.
mm in width) on RSPF, displaying “Originals are being read”.
○
○
○
○
26
Printer
Correction of the error (Size illegal) caused when printing out the long size
paper if the setting is the printer driver preferred setting.
○
○
○
○
27
Printer
Printer using AirPrint cannot be registered with Mac OS 10.10. This has
been supported.
○
○
○
○
28
Printer
Correction of the error (Large-volume of pages is printed as text data)
caused when printing the specific EPS file.
○
○
○
○
29
Printer
Correction of the problem that the machine does not output the data with
"Rendering" displayed in Job Status screen when printing the specific data.
○
○
○
○
30
Printer
Correction of failure to print on Index paper properly
When Index paper setting is turned on and Short Edge Duplex is set, the
papers are bound on long edge.
○
○
○
○
31
Printer
Correction of failure to register Print release
If multiple jobs for print release are registered all at once, the jobs may not
be registered on Print release job screen.
○
○
○
○
32
Printer
Correction of failure to perform Cloud Print properly
When 2-Sided Tablet (Booklet) and 8 up are set for Cloud Print, the job may
not be performed properly.
○
○
○
○
○=applied
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man133) service manuals if exist.