Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) Handy Guide online
Initial Set-up
11
Document Solutions After Sales Service
DEVELOPER INSTALLATION
Sim 25-02
Auto Developer Adjustment
Select CMYK
Note: Toner Installation should be performed after
Auto Developer Adjustment is completed
For Optimum Image Quality it is recommended to
install developer at the customer site
Auto Developer Adjustment is completed
For Optimum Image Quality it is recommended to
install developer at the customer site
INITIAL SETTINGS
Sim 26-06
Machine Destination Set
Sim 26-52
Blank Paper Count Mode Setting (Non Print)
Sim 26-65
Finisher Alarm mode
Select Staple sheet limit (30 or 50)
Staple copies/sets limit (ON/OFF)
Sim 26-01
Right Tray Installation
Yes/No.
Sim 26-50
Long Paper Support
0=Disable, 1=Enable
Sim 26-35
Set Multi Error Counter
Set to 1 (Multi Count).
Sim 26-78
Remote Desktop Access Password set.
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:- System Settings – Paper Tray Settings
IMAGE WRITING DISTORTION – CMYK
SIM 50-22
Image Writing Adjustment
PRINT IMAGE MAGNIFICATION & OFF CENTRE
Automatic Adjustment:
Sim 50-28
BK MAG ADJUST (Magnification)
SETUP/PRINT ADJ (Offset)
Normally no need to adjust as set in factory
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) service manuals if exist.