MX-2640N, MX-2640NR, MX-2640FN, MX-3140N, MX-3140NR, MX-3140FN, MX-3640N, MX-3640NR, MX-3640FN (serv.man160). CCE-1274 MX-FR41U Rom Upgrade V3 (Bulletin only) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

 
 
 

3/3 

 

No. Item 

Details 

27 

Main unit control 

Downloading of Device Cloning data fails if IE 10 is used. This problem has been 
corrected. 

28 

Main unit control 

There were some cases where the color of the output result changed in the process of 
continuous printing.    This problem has been corrected.

 

29 

Main unit control 

Though the setting range of the preheat mode is 1 – 60 minutes on Administrator 
Settings List, it is printed as 1 – 240 minutes. This problem has been corrected. 

30 

Main unit control 

Forced tray switch does not function if Printer job is performed in parallel vendor mode. 
This problem has been corrected. 

31 

Main unit control 

A new Simulation mode has been developed to conform to new standard of "Blue Angel" 
(eco-label for Germany). The check box for Auto power shut off mode is not displayed 
when this mode is enabled that machine enters Auto power shut off mode at any time. 
 
Sim26-50 POWER SHUT-OFF SET 
 
While checkbox is not displayed: The machine is under factory default condition for 
EUROPE/UK. 
While displayed: The machine is under factory default condition for those other than 
EUROPE/UK. 

32 

Simulation 

Modification is made so that U2-00 error can be cancelled in SIM16.