Read Sharp MX-2630 (serv.man6) Handy Guide online
SHARP
INITIAL SETUP
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
Page 9
/75
DEVELOPER SETUP:
CMYK Developer is pre-installed by the factory therefore, Sim25-02 Auto Developer
Adjustment should not be executed.
It is recommended to execute Sim25-01 (Developer Stir), prior to installing toner.
Adjustment should not be executed.
It is recommended to execute Sim25-01 (Developer Stir), prior to installing toner.
Only execute Sim25-02 if CMYK Developer has not been pre-installed.
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT:
Install CMYK Toner Cartridges:
Caution:
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode during Initial Toner
Replenishment.
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode during Initial Toner
Replenishment.
PRODUCT ACTIVATION & FIRMWARE UPGRADE:
Activation of Optional Products:
System Settings – Common Settings – Product Key.
Sim 22-05
Check Firmware Version(s):
Upgrade to latest version.
INITIAL SETUP:
Sim 26-01
Right Exit Tray Installation: Yes/No.
Sim 26-02
LCC Installation (Paper Size): A4/Letter.
Sim 26-06
Machine Destination check.
Sim 26-35
Set Multi Error Counter: Set to 1 (Multi Count).
Sim 26-50
Long Paper Support (up to 1300mm): 0 = Disable, 1 = Enable.
Sim 26-52
Non Printed Paper Counter Set-up.
Sim 55-03
Process Mixed Size Pages (orientation) when Printing in Duplex:
SSW 3-6, 0 = Disable, 1 = Enable.
Sim 55-03
PDF/PS Preview Thumbnail for Direct Print Function [MX-PK13 required]:
SSW 34-3, 0 = Disable, 1 = Enable.
Add PANTONE® Colour LUT [Where Available]
Service WebPage – Output Profile Settings – Spot Colour Table Settings;
Upload PANTONE® LUT for CR4 series.
Adjust Date/Time (Inc. Daylight Saving setting):
System Settings – Common Settings – Clock Adjust.
Keyboard Language Setting:
System Settings – Common Settings – Default Keyboard Setting.
Paper Size & Type Settings:
System Settings – Common Settings – Paper Tray Settings.
Set cassette size by adjusting the guides in the cassette.
Click on the first or last page to see other MX-2630 (serv.man6) service manuals if exist.