Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man73) Technical Bulletin online
No. Item
Details
13 OSA
related
When connecting a keyboard, while in an OSA application, the frame display of the focus
would go out of alignment or remain on-screen. This glitch has been corrected.
would go out of alignment or remain on-screen. This glitch has been corrected.
14 OSA
related
When typing into a text box from a connected USB keyboard in an OSA application and
power-saving mode was entered and then recovered from, the text that was entered
would not be displayed on the screen or the main unit would freeze, in some cases. This
glitch has been corrected.
power-saving mode was entered and then recovered from, the text that was entered
would not be displayed on the screen or the main unit would freeze, in some cases. This
glitch has been corrected.
15 OSA
related
From the main unit operations, when [OSA]
[Job Status]
[OSA] operations were
performed, the screen before and after the Job Status screen would not be the same
(the screen status would be re-initialized). This glitch has been corrected.
(the screen status would be re-initialized). This glitch has been corrected.
16 OSA
related
In an OSA application, the job completion notice would not be output. This glitch has
been corrected.
been corrected.
17 OSA
related
In OSA external authentication, continuous job queuing is disabled so that the number of
sheets used can be counted accurately, which slows print speed. A software switch that
allows the user to enable continuous job use has therefore been provided for users who
do not wish to control paper use.
sheets used can be counted accurately, which slows print speed. A software switch that
allows the user to enable continuous job use has therefore been provided for users who
do not wish to control paper use.
Changes implemented to allow continuous job queuing to be enabled/disabled via a
software switch.
software switch.
Sim 55-3, Switch: 24, Data: 7
0 = Job queuing disabled (default)
1 = Job queuing enabled
18 OSA
related
The machine locks up when an unsupported JPEG image is registered as an OSA icon.
This glitch has been corrected.
This glitch has been corrected.
19 UI-related
While automatic tray selection is set to disabled, if paper runs out during printing and the
replacement paper was set to the correct paper, a message prompting that the paper
selected is incorrect would be output. This glitch has been corrected.
replacement paper was set to the correct paper, a message prompting that the paper
selected is incorrect would be output. This glitch has been corrected.
20 UI-related
For Italian and French, there was one part of the operation panel that was localized
incorrectly. This error has been corrected.
incorrectly. This error has been corrected.
21 UI-related
If the user folder is thumb nailed in document filling after the print job is held and stored
in the user folder without being printed, the window may go blank (only the mode bar and
system bar appear). This glitch has been corrected.
in the user folder without being printed, the window may go blank (only the mode bar and
system bar appear). This glitch has been corrected.
22 Option
related
On the built-in keyboard model, if a keyboard type card reader is connected to the read
USB port and low-power mode is entered and then recovered from, the keyboard type
card reader will not be recognized. This glitch has been corrected.
USB port and low-power mode is entered and then recovered from, the keyboard type
card reader will not be recognized. This glitch has been corrected.
23 Copy
related
When the number of pages is specified in [Special Functions]
[Print Menu] of Copy,
the printed page's character size will vary depending on the number of lines printed. This
glitch has been corrected.
glitch has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-756
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man73) service manuals if exist.