Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man102) Technical Bulletin online
[Description: Category Menu 5]
No. Subject
Description
1
MFP Control related
Fixed the problem where the system time is rolled back by five years, five months, and
eight days for one min. at the maximum when a re-operation is conducted on either
screen of Home, System Settings, or Preview about six hours after a previous operation is
conducted on either screen of Home, System Settings, or Preview.
eight days for one min. at the maximum when a re-operation is conducted on either
screen of Home, System Settings, or Preview about six hours after a previous operation is
conducted on either screen of Home, System Settings, or Preview.
2
MFP Control related
Fixed the problem where the machine may hang when it is powered off immediately after
the panel power is turned on in the state of shut-off.
the panel power is turned on in the state of shut-off.
3 Jam
related
Fixed the problem where a PPD2_PRI jam occurs during the output of fax data having
less than three lines.
less than three lines.
4
Fuser control related
Enabled to change the rate of releasing the fusing pressure in printing in Envelop mode
for the solution to the fusing failure.
for the solution to the fusing failure.
Use the following engine soft SW to change the settings.
Engine soft SW (Sim55-1) SW No.: 12 Bit: 1, 2, 3
5
Image quality related
Improved the colour reproducibility in Map mode.
6 UI
related
Modified to terminate the operation panel display after completing releasing the fusing
pressure in the state of the panel SW switched off.
pressure in the state of the panel SW switched off.
7 UI
related
Fixed the problem where protect icons for protected files were not displayed in the
thumbnail display in the Document Filing screen.
thumbnail display in the Document Filing screen.
8 UI
related
Fixed the problem where it is impossible for users to directly enter fax numbers in the
Recipient setting when registering the Relay Broadcast Box in the F-Code Memory Box in
the Address Control menu in the System Settings.
Recipient setting when registering the Relay Broadcast Box in the F-Code Memory Box in
the Address Control menu in the System Settings.
9 UI
related
Fixed the problem where the default password is not displayed when the setting is
changed to be enabled from disabled in [Hold Setting for Received Data Print]. To reach
[Hold Setting for Received Data Print], go to [System Settings]
changed to be enabled from disabled in [Hold Setting for Received Data Print]. To reach
[Hold Setting for Received Data Print], go to [System Settings]
[Fax/Image Send
Settings]
[Operation Settings] and set [Other Settings].
10 UI
related
Fixed the problem where [Disable Duplex] cannot be checked to be ON in the [Tray
Settings (bypass tray)] screen when Gloss paper, Heavy paper, and Envelope is selected
in the setting of the paper type for the bypass tray. To reach [Tray Settings (bypass tray)],
go to [System Settings] and set [Paper Feed Tray Settings].
Settings (bypass tray)] screen when Gloss paper, Heavy paper, and Envelope is selected
in the setting of the paper type for the bypass tray. To reach [Tray Settings (bypass tray)],
go to [System Settings] and set [Paper Feed Tray Settings].
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-654
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man102) service manuals if exist.