Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man70) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-699
No. Item
Details
34 Printer-related
If A4/A3 mixed pages created by Microsoft Office/Word 2003 are printed in 2up double
face printing, the image pasted to the back surface of A3 paper may be lost. This glitch
has been corrected.
face printing, the image pasted to the back surface of A3 paper may be lost. This glitch
has been corrected.
35 Printer-related
If CMYK simulation is selected and a specific PDF file is printed, a PS error may occur.
This glitch has been corrected.
This glitch has been corrected.
36 Printer-related
The PS form registered in the HDD may not be printed correctly. This glitch has been
corrected.
corrected.
37 Printer-related
If excel data, including specific AutoShape data, is printed with the printing quality on the
application side set to "300dpi", the AutoShape image may not be printed correctly. This
glitch has been corrected.
application side set to "300dpi", the AutoShape image may not be printed correctly. This
glitch has been corrected.
38 Printer-related
When printing from the WEB page of the MFP and “Network Settings > Printer Port
Settings > LPD Settings > Banner Use” is enabled, printing would hang-up around 1,000
jobs. This glitch has been corrected.
Settings > LPD Settings > Banner Use” is enabled, printing would hang-up around 1,000
jobs. This glitch has been corrected.
39 Printer-related
If data including the <ESC>E command is printed, there may be cases where the
<ESC>E command is judged as the end of the job and original single job is handled as
several jobs. This glitch has been corrected.
<ESC>E command is judged as the end of the job and original single job is handled as
several jobs. This glitch has been corrected.
40 Printer-related
Any response may not return even if the PCL command to check Macro/Front
registrations is sent. This glitch has been corrected.
registrations is sent. This glitch has been corrected.
41 Printer-related
If the character string reference pointer is not initialized in character string comparison for
automatic discrimination of PDL data, an incorrect address may be accessed and, in rare
cases, the MFP main body may be restarted during printing. This glitch has been
corrected so that the pointer is initialized under all conditions.
automatic discrimination of PDL data, an incorrect address may be accessed and, in rare
cases, the MFP main body may be restarted during printing. This glitch has been
corrected so that the pointer is initialized under all conditions.
42 Printer-related
The next job may result in a PCL XL error when it receives an invalid XL file without job
end. This glitch has been corrected.
end. This glitch has been corrected.
43
Support for new
standards of the
International Energy
Star program
standards of the
International Energy
Star program
The criteria change of the International Energy Star program involves the following
changes of the factory default values for the function of preheating and auto power
shutoff:
changes of the factory default values for the function of preheating and auto power
shutoff:
Model
name
Destination
Before change
After change
Preheating
Auto power
shutoff
Preheating
Auto power
shutoff
MX-2300N
Europe
Australia
15 min.
45 min.
1 min.
12 min.
Notes:
Updating to this version does not involve any changes to the setting value for the MFP
printer.
printer.
The time required for the function of preheating and auto power shutoff to be active will be
reset to the factory default value as described above; when a system administrator
performs the operation of saving and/or calling system settings and then resets to the
factory default value, or when “destination change (Sim26-6)” is implemented.
reset to the factory default value as described above; when a system administrator
performs the operation of saving and/or calling system settings and then resets to the
factory default value, or when “destination change (Sim26-6)” is implemented.
44
Main body control-
related
related
The specifications have been changed so that continuous jobs can be accepted using "no
temporary accounting mode" and the "no temporary accounting + filing" function.
temporary accounting mode" and the "no temporary accounting + filing" function.
45
Main body control-
related
related
If the Equitrac card reader cannot read information or if the CPU is heavily loaded, a key
may not be read. This glitch has been corrected.
may not be read. This glitch has been corrected.
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man70) service manuals if exist.