MX-2300N, MX-2700N, MX-2300G, MX-2700G, MX-2300FG, MX-2700FG (serv.man21). Printer Guide (Supplied as pdf file on m c's Hard Disk Drive). - Sharp Copying Equipment User Guide / Operation Manual. Page 53

Settings can be configured in the Web pages of the machine to enable direct printing from a computer without using the 
printer driver.

You can specify a file to be printed directly without using the printer driver.
In addition to a file on your computer, this procedure can be used to print any file that can be accessed from your 
computer, such as a file on another computer connected to the same network.
To directly print a file on a computer, click [Document Operations] and then [Submit Print Job] in the Web page menu.

You can print a file from your computer by simply dragging and dropping the file onto the FTP server of the machine.

• Configuring settings

To enable FTP Print, click [Application Settings] and then [FTP Print Settings] in the Web page menu, enable FTP 
Print in "FTP Print Settings from Client PC", and configure the port number. (Administrator rights are required.)

• Performing FTP Print

Type "ftp://" and then the IP address of the machine in the address bar of your computer's Web browser as shown 
below.
(Example)
ftp://192.168.1.28

Drag and drop the file that you wish to print onto the "lp" folder that appears in your Web browser. The file will 
automatically begin printing.

• If you printed a file (PCL or PS) that includes print settings, the settings will be applied.

• When user authentication is enabled in the system settings (administrator) of the machine, the print function may be 

restricted. For more information, see "User Control" in the System Settings Guide.