MX-2300N, MX-2700N, MX-2300G, MX-2700G, MX-2300FG, MX-2700FG (serv.man19). System Settings Guide (Supplied as pdf file on m c's Hard Disk Drive). - Sharp Copying Equipment User Guide / Operation Manual. Page 121

This setting is used to prohibit tray settings.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This setting is disable the saddle stitch finisher or 
finisher, such as when the unit malfunctions.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This setting is used to disable the offset function.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This setting is used to prohibit stapling, such as when 
the stapler unit of the finisher or the saddle stitch 
finisher malfunctions.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This setting is used to prohibit punching, such as 
when the punch module of the finisher or the saddle 
stitch finisher malfunctions.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

When a colour-related problem has occurred and 
printing is not possible, the use of colour mode can be 
prohibited on an emergency basis and only black and 
white printing allowed.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This prohibits the use of the machine as a master 
machine for tandem printing.
To enable this setting, select the checkbox 

 and 

touch the [OK] key. (Normally this setting is not 
necessary.)

This prohibits the use of the machine as a slave 
machine for tandem printing.
To enable this setting, select the checkbox 

 and 

touch the [OK] key. (Normally this setting is not 
necessary.)

This is used to prohibit copying when the paper and 
original are placed in different orientations or the 
proper size of paper is not loaded.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This is used to prohibit the deletion and changing of 
copy settings stored in job programs.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This is used to prohibit the use of the bypass tray 
when making two-sided copies.
The bypass tray is often used to feed label sheets, 
transparency film, and other special papers for which 
two-sided copying is prohibited. If one of these 
special papers enters the reversing unit, a misfeed or 
damage to the unit may result. If special papers for 
which two-sided copying is prohibited are often used, 
it is recommended that you enable this setting.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

This function is only for use as an emergency 
measure. Once this setting is enabled, only a service 
technician can cancel the setting. Promptly contact 
your dealer or nearest authorised service 
representative to have a service technician cancel the 
setting and resolve the colour-related problem.

This setting is only effective when "

" (page 97) is disabled.