Read Sharp MX-1800N (serv.man6) Service Manual online
MX-2300/2700 N/G MX-SMX1 21 – 1
MX2700N
Service Manual
[21] MX-SMX1
1. Unpacking
A. Parts included
2. Installation
A. Installation of the expansion memory
1) Turn OFF the main switch of the copier, and disconnect the
power plug of the copier from the power outlet.
2) Remove the screw, and remove the rear cabinet.
3) Remove the connector and the screw, and remove the MFP
PWB shield plate upper.
4) Install the expansion memory to the connector.
* Note for installing the expansion memory
a)
a)
Push the sections indicated with
→ at the same time with
both hands.
* When handling the expansion memory, be careful not to
* When handling the expansion memory, be careful not to
touch the pin section.
* Insert the memory straightly until it comes in contact
with the contact.
* When inserting, be careful not to slant the memory for
the connector. Do not push the memory by one hand
alone.
alone.
b)
Push the sections indicated with
→ at the same time with
both hands until the right and the left buttons are locked.
5)
Install the MFP PWB shield plate upper, and connect the con-
nector.
nector.
256MB expansion memory
1
2
1
2
3
1
2
Click on the first or last page to see other MX-1800N (serv.man6) service manuals if exist.