Read Sharp LC-52XS1E (serv.man2) Service Manual online
LC-52XS1E/RU/LC-65XS1E/RU
2 – 1
LC-52XS1E
Service Manual
CHAPTER 2.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-52XS1E/RU)
1. Removing of Speaker Box Ass'y and Cabinet B Ass'y
1. Remove the 4 lock screws
and detach the Speaker Angle Cover Ass'y
.
2. Remove the 4 lock screws
and detach the Speaker Box Ass'y
3. Detach the AC Cover Top
. Remove the 2 lock screws
and AC Cover Bottom
.
4. Detach the Terminal Cover
, Bus-Cone Cover
and 2 VESA Caps
.
5. Remove the 13 lock screws
, 6 lock screws
, 4 lock screws
, Reinforcement panel
, and 20 lock screws . Detach the Cabinet B Ass'y.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
5
12
1
2
7
8
13
9
4
6
14
10
11
11
11
3
Speaker Box Ass'y
Speaker Angle
Cover Ass'y
AC Cover Top
VESA Cap
Cabinet B Ass'y
Bus-Cone Cover
Terminal Cover
AC Cover Bottom
LC-52XS1E/RU/LC-65XS1E/RU
2 – 2
2. Removing of R/C, LED Unit and each shield.
1. Disconnect the RA connector from R/C, LED Unit.
2. Remove the 2 lock screws
and detach the R/C, LED Unit.
3. Remove the 2 lock screws
and 9 lock screws
. Detach the IF Radiator Shield Ass'y.
4. Remove the 1 lock screw
and 7 lock screws
. Detach the A3C Radiator Shield Ass'y.
5. Remove the 12 lock screws
and detach the Chassis Tray Shield R.
6. Remove the 1 lock screw
and detach the Barrier Sheet
. Remove the 11 lock screws
and detach Chassis Tray Shield L Ass'y.
1
2
3
4
5
6
7
8
9
Chassis Tray
Shield L Ass'y
Chassis Tray
Shield R
A3C Radiator
Shield Ass'y
IF Radiator
Shield Ass'y
R/C, LED Unit
Barrier Sheet
9
7
8
6
3
2
2
1
4
5
[RA]
[RA]
LC-52XS1E/RU/LC-65XS1E/RU
2 – 3
3. Removing of connectors
1. Disconnect the following connectors from IF Unit. (LE, PD, PE, LW, KM, LB, FR, SP, US)
2. Disconnect the following connectors from USB Unit. (US)
3. Disconnect the following connectors from SP-T Unit. (SP)
4. Disconnect the following connectors from A3C LCD T-CON Unit. (RA, LW, LB, LC)
5. Disconnect the following connectors from MAIN POWER Unit. (PD, PI, PE, PS1, ACM)
6. Disconnect the following connectors from SUB-1 POWER Unit. (PS1, PS2, LA1, AC1, ACM)
7. Disconnect the following connectors from SUB-2 POWER Unit. (PS2, LA2, AC1, AC2)
8. Disconnect the AC2 connector from AC INLET Unit.
9. Disconnect the KM connector from KEY Unit.
10.Disconnect the AC connector from DC OUTPUT Unit.
[ACM]
[AC1]
[AC2]
[PI] [PE]
[LA1]
[LA1]
[PS2]
[ACM] [AC1]
[PI]
[SP]
[PD]
[LE]
[RA]
[LW]
[LB]
[AC]
[US]
[KM]
[LC]
[LA2]
[LA2]
[PS2]
[PS1]
IF Unit
USB Unit
KEY Unit
SP-T Unit
DC OUTPUT Unit
AC INLET Unit
A3C LCD
T-CON Unit
MAIN POWER Unit
SUB-1 POWER Unit
SUB-2
POWER Unit
[AC2]
IF Unit
[PD]
[US]
[KM]
[LE]
[LW]
[PE]
[LB]
[FR]
[SP]
LC-52XS1E/RU/LC-65XS1E/RU
2 – 4
4. Removing of MAIN POWER Unit, SUB-1 POWER Unit and SUB-2 POWER Unit
1. Remove the 15 lock screws
.
2. Detach the Power Unit Fix Angle Top Ass'y
, Power Unit Fix Angle Bottom Ass'y
and Power Unit Fix Angle
.
3. Remove the 12 lock screws
. Detach the MAIN POWER Unit, SUB-1 POWER Unit and SUB-2 POWER Unit.
1
2
3
4
5
5
1
2
4
3
MAIN POWER Unit
SUB-1 POWER Unit
SUB-2 POWER Unit
Power Unit Fix Angle
Top Ass'y
Power Unit Fix Angle
Bottom Ass'y
Power Unit
Fix Angle