MX-1800N (serv.man6). Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 75

MX-2300/2700 N/G  MX-AMX2  16 – 1

MX2700N

Service Manual

 

To enable a standard application to be used, the administrator of
the machine should follow the steps below to enter the product key
and activate the Application Communication Module. (This is usu-
ally done by the installing dealer.)

1) Press the [SYSTEM SETTINGS] key.
2) Touch the [Admin Password] key.
3) Touch the [Password] key and enter the administrator pass-

word.

4) Touch the [OK] key.
5) Touch the [Product Key] key.

You may have to scroll down the screen to show this key.

6) Touch the [Application Communication Module] key.
7) Enter your product key.

NOTE: The product key can be entered from the Web pages.

When the product key is entered in the machine, the [OSA Set-
tings] key is added to the menu screen of the system settings or the
key operator programs.
The following screen appears when steps 1) through 4) of "To acti-
vate the Application Communication Module" are performed.

When the [OSA Settings] key is touched in the above menu screen,
the following screen will appear.

When the [Default Display Setting] key is touched, the screen for
setting the default display that appears when the [DOCUMENT FIL-
ING] key is pressed will appear.
To set the base screen of document filing as the default display,
touch the [Document Filing] key. To set the external application
selection screen as the default display, touch the [OSA] key.
After selecting the setting, touch the [OK] key. (The factory default
setting is [Document Filing].)
NOTE:
• "Default Display Setting" also appears in "Document Filing Set-

tings" in the system settings (administrator).

• If the [CA] key is pressed in document filing mode or OSA mode,

the base screen of that mode will appear regardless of the
default display setting.

When the product key is entered in the machine, a page for setting
up standard applications is added to the Web pages of the
machine. This page is used to store standard applications. The pro-
cedure for storing standard applications is explained below.
1)

Click the [Login] button that appears in the upper right-hand
corner of the Web page.

2)

Select [Administrator] in [Login Name] and then enter your
password.

3)

Click [Application Settings], and then click [External Applica-
tions Setup] in the menu frame.

4)

Click [Standard Applications].

5)

Configure the standard application settings.
Up to 8 standard applications can be stored.

There are two methods for selecting a standard application that has
been stored in the Web pages of the machine: selecting the appli-
cation from the base screen of any of the modes, and selecting the
application from document filing mode.

After the product key is entered in the machine, the OSA icon will
appear in the lower left-hand corner of the job status screen. Follow
the steps below to select a standard application.

1)

Touch the OSA icon.
If only one application is registered, connection is made
directly to the application.
If no standard applications have been stored in the Web
pages, the key cannot be touched.

2)

Select the standard application.
If one or more standard applications have been stored in the
Web pages, the screen to select the standard application will
appear. Select the standard application that you wish to use
from the following screen.

3)

The machine connects to the standard application.
The message "Connecting to the External Application."
appears while the machine communicates with the standard
application.

1

CD-ROM

1

2

Operation manual

1

3

Product key sheet

1

1

2

3

OSA Settings

Security Settings

Product Key

Change Admini-

strator Password

Storing/Calling

of System Settings

List Print

(Administrator)

Enable/Disable

Settings

3/3

System Settings

Logout

Exit

OSA Settings

Doc. Filing

OK

Default Display Setting

App 01

App 02

App 03

App 04

1/2