MX-1800N (serv.man6). Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 13

MX-2300G/N, MX-2700G/N  1 – 10

* Dust from the transfer belt or shutter or some other adjacent part

may fall onto the LSU during transport or installation. Be sure to
clean the dust-proof glass before checking the image quality.

1) Open the front cover.

2) Remove the waste toner bottle unit.

3) Detach the LSU cleaning bar from the front cover.

4) Insert the LSU cleaning rod, and slide it back and forth a few

times to clean the LSU dust-proof glass.

5)

Replace the LSU claning bar to the front cover and attach the
waste toner bottle unit.

6)

Close the front cabinet.

1)

Install the Operation Manual storage (package part No. 3)
cover to the left side of the machine.
First, insert the pawl on the lower side of the Operation Manual
pocket.
Then, lift the pawl on the upper side and insert it, and slide
down to install.
* If the MX-FNX2 (saddle finisher) is installed together with

installation of the machine, the Operation Manual storage
cover must be installed to the saddle finisher.
For details, refer to [8] MX-FNX2.

1

1

2

: Dec. 15 2005