Read Sharp MX-1800N (serv.man20) Service Manual online
MX-1800N OTHERS 12 – 3
Disabling of Bypass Printing
Disable
Key Operation Setting
0.0 sec.
Disable Auto Key Repeat
Disable
Disabling of Clock Adjustment
Disable
Disabling of Covers/Inserts Mode
Disable
Customize Key Setting
Copy
Customize 1
Special Modes
Customize 2
File
Customize 3
Quick File
Scan
Customize 1
Special Modes
Customize 2
File
Customize 3
Quick File
Internet Fax*2
Customize 1
Special Modes
Customize 2
File
Customize 3
Quick File
Fax*3
Customize 1
Special Modes
Customize 2
File
Customize 3
Quick File
USB Memory Scan
Customize 1
Special Modes
Customize 2
Erase
Customize 3
Suppress BG
Data Entry
Customize 1
Special Modes
Customize 2
File
Customize 3
Quick File
Device Control
Original Size Detector Setting
Original Detection Size
Combination
Varies depending on
country and region
country and region
Cancel Detection at Document
Glass
Disable
Disabling of Document Feeder
Disable
Original Feeding Mode
All Disabled
Disabling of Duplex
Disable
Disabling of Optional Paper Drawer*4
Disable
Disabling of Tray Setting
Disable
Disabling of Finisher*5
Disable
Disabling of Offset
Disable
Disabling of Stapler*5
Disable
Disabling of Punch*6
Disable
Disabling of Colour Mode*7
Disable
Auto Paper Selection Setting
Plain Paper
Registration Adjustment
Auto Adjustment
-
Optimization of the Hard Disk
-
Tandem Connection Setting
IP Address of Slave Machine
0.0.0.0
Port Number
50001
Disabling of Master Machine Mode
Disable
Disabling of Slave Machine Mode
Disable
Clear All Job Log Data
-
Detect Standard in Auto Colour Mode
3
Copy Settings
Initial Status Settings
Colour Mode
Full Colour
Paper Tray
Varies depending on the
machine configuration
machine configuration
Exposure Type
Auto
Copy Ratio
100%
2-Sided Copy
1-Side to 1-Side
Output
-
Exposure Adjustment
Colour
Document Glass
5
Document Feeder
5
B/W
Item
Factory default setting
Document Glass
5
Document Feeder
5
Rotation Copy Setting
Enable
Add or Change Extra Preset Ratios
Reduction
-
Enlargement
-
Setting a Maximum Number of Copies
999
Initial Margin Shift Setting
Side-1
10 mm (1/2")
Side-2
Erase Width Adjustment
Edge
10 mm (1/2")
Centre
Card Shot Settings
Original Size
X: 86 mm (3-3/8")
Y: 54 mm (2-1/8")
Y: 54 mm (2-1/8")
Fit to Page
Disable
Initial Tab Copy Setting
10 mm (1/2")
Disabling Deletion of Job Programs
Disable
Disabling of Bypass-Tray in Duplex
Copy
Disable
Disabling of Auto Paper Selection
Disable
Auto Selection Setting of Tray that is
Supplied the Paper
Disable
Initial Colour Balance Setting
Factory Default State
Auto Colour Calibration
-
B/W 600dpi x 600dpi Scanning Mode
for Document Feeder
Disable
B/W Quick Scan from Document Glass
Enable
Network Settings
IP Address Setting
DHCP
Enable TCP/IP
Enable
Enable NetWare
Enable
Enable EtherTalk
Enable
Enable NetBEUI
Enable
Reset the NIC
-
Ping Command
-
Printer Settings
Default Settings
Prohibit Notice Page Printing
Enable
Prohibit Test Page Printing
Disable
A4/Letter Size Auto Change
Varies depending on
country and region.
country and region.
Print Density Level
Colour
3
B/W
3
Bypass Tray Settings
Enable Detected Paper Size in
Bypass Tray
Disable
Enable Selected Paper Type in
Bypass Tray
Enable
Exclude Bypass-Tray from Auto
Paper Select
Disable
Job Spool Queuing
Enable
Interface Settings
Hexadecimal Dump Mode
Disable
I/O Timeout
60 sec.
Enable USB Port
Enable
USB Port Emulation Switching
PCL (Auto*8)
Enable Network Port
Enable
Network Port Emulation Switching
PCL (Auto*8)
Port Switching Method
Switch at End of Job
Colour Adjustments
Auto Colour Calibration
-
Image Send Settings
Operation Settings
Default Display Setting
Mode
Scan (Fax*3)
Hold settings for a while after
scanning has been completed
Disable
Switch Automatically to Copy
Mode Screen
Disable
Item
Factory default setting
Click on the first or last page to see other MX-1800N (serv.man20) service manuals if exist.