Read Sharp MX-1800N (serv.man15) Service Manual online
MX-1800N SIMULATION 7 – 76
63-6
Purpose
Adjustment/Setup
Function (Purpose) Used to scan the engine color balance auto
adjustment pattern setting.
Section
Image process (ICU)
Operation/Procedure
1) Place the chart self printed with Sim46-21 on the glass table.
2) Touch [EXECUTE] key.
1) Place the chart self printed with Sim46-21 on the glass table.
2) Touch [EXECUTE] key.
63-7
Purpose
Setting
Function (Purpose) Used to perform the auto density adjust-
ment scanner target value.
Section
Image process (ICU)
Operation/Procedure
1) Touch [SETUP] key.
2) Place the chart self printed with Sim46-21 on the glass table.
3) Touch [EXECUTE] key.
4) Touch [OK] key.
1) Touch [SETUP] key.
2) Place the chart self printed with Sim46-21 on the glass table.
3) Touch [EXECUTE] key.
4) Touch [OK] key.
63-8
Purpose
Setting
Function (Purpose) Used to perform the initial value reset of the
engine auto adjustment scanner target
value (Service).
value (Service).
Section
Image process (ICU)
Operation/Procedure
1)
1)
Touch [EXECUTE] key.
2)
Touch [YES] key.
63-11
Purpose
Setting
Function (Purpose) Used to set the reference scanner target
value for the engine auto density adjust-
ment.
ment.
Section
Scanner (Scanning)
Operation/Procedure
Select target item with touch panel.
Select target item with touch panel.
64
64-1
Purpose
Operation test/Check
Function (Purpose) Used to execute self-print (Color mode).
Section
Section
Printer
Operation/Procedure
1)
1)
Select color target for self print with [K] [C] [M] [Y] keys.
2)
Select the set item with [
↑] and [↓] keys.
3)
Enter the set value with 10-key.
4)
Touch [EXECUTE] key.
Display data
Display content
B
Point B target value
C
Point C target value
D
Point D target value
E
Point E target value
F
Point F target value
G
Point G target value
H
Point H target value
I
Point I target value
J
Point J target value
K
Point K target value
L
Point L target value
M
Point M target value
N
Point N target value
O
Point O target value
BASE
Base sampling value
0
SIMULATION NO.63̆06
TEST
ENGINE COLOR BALANCE CHART READING
CLOSE
EXECUTE
SET THE CHART ON PLATEN AND TOUCH [EXECUTE]
K
C
M
Y
SETUP
SIMULATION NO.63-07
TEST
SCANNER TARGET OF COLOR CALIB SETUP:SERVICE
#B:
#B:
91, #C
2944, #D:
3227, #E:
5822, #F:
8600
#G: 28935, #H: 54344, #I: 86968, #J: 122678, #K: 151198
#L: 169731, #M: 195950, #N: 201249, #:O: 207112
1/1
0
CLOSE
Item
Set
value
Content
Default
value
Target value table select
DEF1
DEF1 mode setting
DEF1
DEF2
DEF2 mode setting
DEF3
DEF3 mode setting
0
SIMULATION NO.63㧙08
TEST
STANDARD SCANNER TARGET SETTING:SERVICE
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
0
DEF1
SIMULATION NO.63㧙11
TEST
STANDARD SCANNER TARGET SELECT OF ENGINE HALFTONE AUTO ADJUSTMENT
1/1
TARGET TBL
DEF2
DEF3
㧦
CLOSE
Click on the first or last page to see other MX-1800N (serv.man15) service manuals if exist.