Read Sharp MX-1800N (serv.man15) Service Manual online
MX-1800N SIMULATION 7 – 75
62-13
Purpose
Data clear
Function (Purpose) Used to format the hard disk (operation
manual area only).
Section
MFP (HDD)
Operation/Procedure
1) Touch [EXECUTE] key.
2) Touch [YES] key.
1) Touch [EXECUTE] key.
2) Touch [YES] key.
63
63-1
Purpose
Adjustment/Setup/Operation data output/
Check (Display/Print)
Check (Display/Print)
Function (Purpose) Used to check the shading correction
result.
Section
Scanner (Exposure)
Operation/Procedure
Select color target with [R][G][B] keys.
Select color target with [R][G][B] keys.
<Display item and description>
63-2
Purpose
Adjustment
Function (Purpose) Used to execute shading forcibly.
Section
Section
Scanner
Operation/Procedure
Touch [EXECUTE] key.
Shading is started.
Touch [EXECUTE] key.
Shading is started.
63-3
Purpose
Adjustment
Function (Purpose) Used to perform scanner color balance and
color coefficient auto adjustment.
Section
Scanner (scan)
Operation/Procedure
1)
1)
Select adjustment target with [R][G][B] keys.
2)
Touch [OC] key.
3)
Touch [EXECUTE] key.
63-5
Purpose
Adjustment
Function (Purpose) Used to reset the gamma correction and
color correction parameters of the SCAN
ASIC.
ASIC.
Section
Scanner
Operation/Procedure
1)
1)
Touch [SIDE A(OC)] key.
2)
Touch [EXECUTE] key.
3)
Touch [YES] key.
Display item
Description
Remark
GAIN ODD
Gain adjustment value
(ODD)
(ODD)
GAIN EVEN
Gain adjustment value
(EVEN)
(EVEN)
OFFSET ODD
Offset value (ODD)
OFFSET EVEN
Offset value (EVEN)
SMP AVE ODD
Reference plat sampling
average value (ODD)
average value (ODD)
SMP AVE EVEN
Reference plat sampling
average value (EVEN)
average value (EVEN)
TARGET VALUE
Target value
BLACK LEVEL
Black output level
ERROR CODE
Error code (0, 1 to 4)
0: No error
1: STAGE1. Over the
loop number
2: STAGE2. The target
value is less than the
specified level.
3: STAGE3. The gain
set value is negative.
4: END is not
asserted.
1: STAGE1. Over the
loop number
2: STAGE2. The target
value is less than the
specified level.
3: STAGE3. The gain
set value is negative.
4: END is not
asserted.
RSPF WHITE
LEVEL 1ST
LEVEL 1ST
First scan, RSPF white
reference level
reference level
RSPF WHITE
LEVEL 2ND
LEVEL 2ND
Second and later scan,
RSPF white reference
level
RSPF white reference
level
0
SIMULATION NO.62-13
TEST
HDD FORMAT (MANUAL AREA ONLY)
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
0
OFFSET ODD
0
:
SIMULATION NO.63̆01
TEST
SHADING DATA DISPLAY
CLOSE
1/3
GAIN ODD
147
:
GAIN EVEN
143
:
OFFSET EVEN
0
:
B
G
R
SIDE A
(OC)
Copy gamma correction 1 and color correction coefficient
TWAIN gamma correction 1 and color correction coefficient
Auto adjustment gamma correction 1 and color correction
coefficient
TWAIN gamma correction 1 and color correction coefficient
Auto adjustment gamma correction 1 and color correction
coefficient
SIMULATION NO.63̆02
TEST
SHADING EXECUTION
EXECUTE
0
CLOSE
PRESS [EXECUTE]
TO SHADING START
SIMULATION NO.63㧙03
TEST
SCANNER COLOR BALANCE AUTO ADJUSUTMENT
SCANNER MOTOR IS NOT READY
0
1/1
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
EXECUTE
0
SIMULATION NO.63̆05
TEST
STANDARD SCANNER GAMMA SETUP
1/1
SIDE A㧔OC㧕
CLOSE
Click on the first or last page to see other MX-1800N (serv.man15) service manuals if exist.