AR-SS2. Complete service manual - Sharp Copying Equipment Service Manual (repair manual). Page 10

When removing the bin of this machine, remove the bin roller. If,
however, it is removed twice or more, the strength will be decreased
and it must be replaced. For replacement of first bin to 13th bin,
replace from the top. For replacement of the lower bins, replace from
the bottom.

1) Remove the bin unit from the sorter and lay it on a work table.

2) Remove the two screws (2) and remove the accuride rail (1).

3) Remove the three screws on the front and the four screws on the

rear, and remove the bin front cover (3).

4) Remove the four screws (5) and remove the bin upper cover (4).

5) Remove the spring (7) and the screw (8), and then remove the

guide bar holder (5).

6) Remove the bin roller stopper (9) and the bin roller (10), and

remove the bin.

1) Remove the screw (2) of the bin lower unit cover (1), and then

remove the bin lower unit cover.

2) Remove the tie lap (3) and two connectors (4).

3) Pull out the sensor wiring (5) in the arrow direction.

1

2

3

4

5

6

7

8

8

1

2

3

4

5

AR-SS2

4 – 2