Read Sharp AR-SP3 (serv.man2) Service Manual online
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
2) Remove the transport roller.
*
Install so that the earth spring A is brought into contact over bearing
B.
B.
E. Paper feed clutch
1) Remove the E-ring.
2) Remove the paper feed clutch.
3) Remove the parts.
2) Remove the paper feed clutch.
3) Remove the parts.
*
When installing, fit the cut surface A.
F. 2nd paper feed roller
1) Remove the E-ring and the parts.
2) Remove the 2nd paper feed roller.
2) Remove the 2nd paper feed roller.
*
When installing, hang the 2nd connection arm on the 2nd connection
arm SP B. Be sure to install so that the earth spring C is in contact
under the bearing D.
arm SP B. Be sure to install so that the earth spring C is in contact
under the bearing D.
1
2
3
4
2
1
3
A
B
A
1
2
3
B
1
2
1
C
D
A
AR-SP3
4 – 2
Click on the first or last page to see other AR-SP3 (serv.man2) service manuals if exist.