Read Sharp AR-S11 (serv.man2) Service Manual online
AR-S11 DISASSEMBLY AND ASSEMBLY 4 - 4
2) Adjust engagement of the lead cam drive gear (1) so that the upper
blade tips of the lead cams on the front and the rear sides are as
shown in the figure below.
shown in the figure below.
3) Attach the E-ring.
Note: When assembling the flag (1) for the lead cam home position
sensor, fit the teeth tips (2) of the lead cam with the phase of the
flag (1) as shown below.
flag (1) as shown below.
E. Guide bar motor (M3) removal
1) Lift the bin unit to the top for easiness of work.
2) Remove the screw (1) and remove the bin lower unit cover (2).
3) Remove the connector (3) and two screws (4), and then remove
the guide bar motor (5).
3. Transport guide unit
A. Transport guide unit removal
1) Remove the screws (1), and remove the transport guide unit (2).
B. Transport motor (M2) removal
1) Remove the rear cover.
2) Remove the connector (1) and two screws (2), and then remove
the transport motor (3).
Remove the two screws (4), and then remove the transport motor
(5).
(5).
C. Transport roller removal
1) Remove the latch unit, the front cover, the transport guide unit, the
rear cover, and the transport motor.
2) Remove the E-ring (1), the transport roller bushing (2) and the gear
(3).
3) Remove the screw (4), and remove the transport roller attachment
fixture (5).
4) Remove the transport roller (6).
1
2
1
2
3
4
5
1
2
1
5
4
2
3
2
1
3
4
5
6
Click on the first or last page to see other AR-S11 (serv.man2) service manuals if exist.