Read Sharp AR-RB1 (serv.man2) Service Manual online
AR-RB1 SPECIFICATIONS 1 - 1
[1] SPECIFICATIONS
1. Type
2. System
3. Paper size
4. Paper weight
5. Paper capacity
6. Paper feed transport speed
7. Paper feed speed
8. Power supply
9. Weight
10. Drive pattern
11. Outer dimensions
12. Power consumption
[2] UNPACKING AND
INSTALLATION
1. UNPACKING
Note: Never put the reverse bypass module down by the dotted sec-
tion on the floor. (The full actuator may be damaged.)
2. Installation
Before installation
• Start installation after checking that the DATA indicator on the oper-
ation panel is neither lit nor blinking.
• For installation of AR-RB1, an optional stand (AR-D17/AR-D18/AR-
D19) must have been installed.
• Ensure that the connecting plate located on the front side of the
optional stand and the connecting plates on the sides (one on the
right side and left side respectively) are securely attached.
right side and left side respectively) are securely attached.
Duplex bypass with paper delivery reverse
Straight path
Face-up paper delivery
Reverse path
Face-down delivery
Duplex bypass
Reverse direction and delivery to duplex unit
A3W/A3/B4/A4/A4R/B5/B5R/A5/A6R/Custom
(12
(12
×
18/11
×
17/8.5
×
14/8.5
×
13/8.5
×
11/8.5
×
11R/7.25
×
10.5R/
8.5
×
5.5/EXERA)
Face-up delivery
64 – 105g/m
2
, 106 – 300g/m
2
Face-down delivery/
ADU delivery
ADU delivery
64 – 105g/m
2
, 106 – 200g/m
2
250 sheets
(conditions: A4/letter size recommended, face-down delivery)
(conditions: A4/letter size recommended, face-down delivery)
58.5mm/s – 550mm/s
(speed based on signal commands from the copier)
(speed based on signal commands from the copier)
Full color
26 sheets/min. (A4 landscape feed)
Monochrome
33 sheets/min. (A4 landscape feed)
5V, 24V supplied by the desk control PWB
6.5 kg
Paper feed, upper and lower turnover motors (stepping motors) and
drive PWB built-in
drive PWB built-in
442.6 (W)
×
126.2 (D)
×
431.8 (H) mm
24V: 1A/24W
5V: 0.1A/0.5W
5V: 0.1A/0.5W
Packing case
Spacer
Spacer
Accessories
Restraining tape
(remove)
(remove)
Restraining tape (remove)
Click on the first or last page to see other AR-RB1 (serv.man2) service manuals if exist.