Read Sharp AR-PN1 Service Manual online
5-2
CHAPTER 5 TROUBLESHOOTING
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2) Adjust the folding position by pressing the PSW1 or PSW2 on the finisher controller
PCB a required number of times. Pressing the switch once moves the folding position
about 0.16 mm.
about 0.16 mm.
• To move the folding position in the “-” direction, press the PSW1.
• To move the folding position in the “+” direction, press the PSW2.
• Pressing the PSW1 and PSW2 at the same time clears the adjustment value.
• To move the folding position in the “+” direction, press the PSW2.
• Pressing the PSW1 and PSW2 at the same time clears the adjustment value.
F05-101-03
3) When adjustment of the folding position is complete, set all bits of the SW1 on the fin-
isher controller PCB to OFF.
4) Enter the bind mode of the host machine and check whether the folding position is ad-
justed properly. If adjusted improperly, adjust the folding position again.
+ direction
- direction
Chap05.p65
3/28/01, 12:11 PM
2
Click on the first or last page to see other AR-PN1 service manuals if exist.