Read Sharp AR-PN1 Service Manual online
3-33
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1.3.2 Removing the Slide Home Position PCB
1) Open the front door [1], and turn the tab
[2] on the stapler slide in the direction
of the arrow to slide the stapler to the
frontmost point.
of the arrow to slide the stapler to the
frontmost point.
2) Remove the stapler unit. (See 1.2.1.)
F03-103-02
3) Place the stapler unit [3] as shown.
4) Remove the two screws [4], and detach
4) Remove the two screws [4], and detach
the guide [5].
F03-103-03
5) Turn the tab [2] on the stapler side in
the direction of the arrow so that that
the fixing screw [7] of the slide home
position PCB [6] is in view through the
round hole.
the fixing screw [7] of the slide home
position PCB [6] is in view through the
round hole.
6) Remove the fixing screw [7].
F03-103-04
[1]
[2]
[4]
[5]
[4]
[3]
[2]
[6]
[7]
Chap03.p65
3/28/01, 12:09 PM
33
Click on the first or last page to see other AR-PN1 service manuals if exist.