AR-PG1 (serv.man4). ARPG1M Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 10

1

Getting started

Insert the installation CD-ROM into the CD-ROM drive. (If you are using the USB
interface, confirm that the installation CD-ROM is in the CD-ROM drive.) Select the
CD-ROM drive and click the Next button.

Windows driver file search will find the device “SHARP AR-150 Series”. Click the
Next button. Proceed to step 9.

Insert the installation CD-ROM into the CD-ROM drive. (If you are using the USB
interface, confirm that the installation CD-ROM is in the CD-ROM drive.) Click the
Start button and select Run. When the window shown below appears, type R:\SETUP
(if the CD-ROM is designated as drive R) and click the OK button. Proceed to step 9.

The installation program will start. To select a different folder, select Browse and type
in the path and folder name where the printer driver will be installed. Click OK and
say YES to create the folder, select the Next button to continue. To install the printer
driver to the default folder, click the Next button.

On the display you will see “printer port to be used”. The printer port is selected
automatically. If you are using the parallel interface, this is LPT1. If you are using the
USB interface, this is LPT/USB1. Ensure that Yes is checked to use the printer as the
default printer. Finally click the Next button.

A “Confirm installation” window will be displayed. To continue installation, click the
Yes button.

When the installation is complete, you will be asked whether or not to print a test
page. If you wish to do so, click the Yes button. At this time, ensure that paper is
loaded in the paper tray.