AR-PG1 (serv.man4). ARPG1M Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 17

2

Printing

DOS Emulation
A PCL4 DOS Emulation setup program can be started by clicking the Setup button. This is an
independent program that configures the PCL4 DOS emulation.

DOS copies

Specifies the number of sets to be printed. From 1 to 99 sets can
be selected. (default setting: 1)

DOS orientation

Sets the page orientation. Portrait or landscape can be selected.
(default setting: portrait)

DOS paper source

Specifies a paper feed station in the printer. (default setting: Tray
1)

DOS paper size

Specifies size of paper to be printed. (default setting:  letter or A4
depending on the countries or regions)

DOS A4 width

Specifies the number of columns in a line in the width direction of
A4 size. (default setting: 77 columns)

DOS lines per page

Specifies the number of lines per page. (default setting: 60 lines
or 64 lines depending on the countries or regions)

DOS font

Specifies the font to be used for printing. (default setting: Courier
Regular)

DOS font size

Specifies the font size. (default setting: 10 CPI)

DOS symbol set

Specifies the symbol set to be used for printing. (default setting:
Roman-8)

About
There are no settings that you can make on the “About” tab page. This page displays the
installed printer driver version and copyright statements.

You can execute printing from an MS-DOS application which has been executed from the MS-
DOS prompt in Windows.

This printer can only print from MS-DOS applications run from the MS-DOS
prompt in Windows using the parallel interface. You cannot print from MS-DOS
applications using the USB interface. Also, you cannot print when running in
native MS-DOS mode.

Windows 95/Windows 98 has “Spool MS-DOS print jobs” in the port settings. If this setting is
not selected, the printer will not operate properly. Use the following procedure to check the
setting.