Read Sharp AR-PE3 (serv.man12) User Guide / Operation Manual online
1
1-2
Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
successful installation are:
•
Physically connecting the Fiery X3e to a functioning network
Prepare a network node for the Fiery X3e—obtain cable, route it to the location where
the Fiery X3e will be installed, and attach the cable to the network interface. For
details, see
the Fiery X3e will be installed, and attach the cable to the network interface. For
details, see
page 3-8
.
•
Configuring the network server
When network servers are required, you need to configure those servers to provide
client access to the Fiery X3e as a PCL or PostScript printer. For information about
configuring network servers in Windows and UNIX network environments, see
client access to the Fiery X3e as a PCL or PostScript printer. For information about
configuring network servers in Windows and UNIX network environments, see
Chapter 2
.
•
Setting up the Fiery X3e
Configure the Fiery X3e for your particular printing and network environment.
First read
First read
Chapter 2
, and then see subsequent chapters for details.
•
Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the Fiery X3e over the network. These steps are described in the
client to the Fiery X3e over the network. These steps are described in the
User Software
Installation Guide
, and some information is also provided in
Chapter 2
.
•
Administering the Fiery X3e
Monitor and maintain system performance and troubleshoot problems that arise.
For details, see
For details, see
Chapter 7
of this manual and the
Job Management Guide
.
Click on the first or last page to see other AR-PE3 (serv.man12) service manuals if exist.