AR-PE2 (serv.man6). AR-PE2 EFI Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 21

•

Color Charts

—Prints the color reference charts, including swatches of the RGB, 

CMY, and Pantone colors available from the Fiery AR-PE2. 

•

Font List

—Prints a list of all the fonts resident on the Fiery AR-PE2 hard disk 

drive.

Suspend Printing

— This option interrupts the current print job so you can use the copier 

to make copies. If it has not finished processing, the RIP will continue but the job will 
not print. You can then select 

Resume Printing

. 

Resume Printing

—Resumes printing after interrupting the print job in order to make 

copies.

Reboot Server

—Shuts down all printing activity properly and then restarts the 

Fiery AR-PE2. Access to Fiery AR-PE2 Setup options is made available at this time. The 
option Shut Down System shuts down the system properly so that you can safely power 
off the copier.

Run Setup

—Configure the Fiery AR-PE2 for specific options at startup and save the 

settings on the Fiery AR-PE2. Certain options may be required in order to connect to 
networked computers. See the Configuration Guide for more information.

Run Diagnostics

—Select this option to access:

•

Test I/F board

—Runs diagnostics on the Fiery AR-PE2 board.

Calibration

—Select calibration options such as Remove Calibration, Print Measurement 

Page, or Apply Calibration.