AR-PE1 (serv.man12). ARPE1 Configuration Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 16

 

Installation can be performed by a network or printing administrator. The stages of a 
successful installation are:

 

Prepare a network node for the Fiery X4—obtain cable and route it to the location 
where the Fiery X4 will be installed (near the copier) and attach the cable to the net-
work interface of the Fiery X4. See page 2-10 for details.

 

If you plan to run the Command WorkStation software, you will need to install 

the software and connect the Command WorkStation computer to the network along 
with the Fiery X4. See 

 

 for details.

 

When network servers are required, you need to configure those servers to provide 
client access to the Fiery X4 as a color PostScript printer. See Chapter 5 for 
information on configuring network servers in Windows and UNIX network 
environments.

 

Configure the Fiery X4 for your particular printing and network environment. First 
read Chapter 2, and then see the following chapters for details.

 

Install the files needed for printing, install additional user software, and connect the 
client to the Fiery X4 over the network. These steps are described in 

 

 

and some information is provided in Chapter 5 of this manual.

 

Monitor and maintain system performance and troubleshoot problems that arise. See 
Chapter 6 and the 

 

for details.