AR-PE1 (serv.man12). ARPE1 Configuration Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 122

When the Fiery X4 is configured to connect to a NetWare server, it polls the NetWare 
server for jobs in each of its queues. If jobs are found, they are automatically transferred 
over the network to the matching connection on the Fiery X4. For example, jobs from 
the NetWare queue with the 

_print

 extension are sent to the Fiery X4 Print queue, and 

so on. While a job is processed and printed, a record of the job is being created. You 
can access the Job Log containing these records at any time.

The following sections explain how to set up a NetWare file server so that networked 
users can print to the Fiery X4 from their workstations, and the Fiery X4 can obtain 
print jobs from the NetWare server.

For each NetWare file server that you configure, follow these general steps. More detail 
is provided in subsequent sections and in your NetWare documentation.

• Make sure the server is connected to a functioning IPX network.

• Log in as the Supervisor on a PC connected to the NetWare file server.

• For NetWare 4.x installations, set up an NDS connection (see page 5-6). 

• For NetWare 4.x in emulation mode, set the bindery context (see page 5-6). 

• For NetWare 3.x and for NetWare 4.x in bindery emulation, set up a file server, 

a print server, and a print queue for the Fiery X4 (see page 5-7). 

With bindery services, you can route all Fiery X4 print jobs through the same NetWare 
file server, or you can configure more than one file server to handle Fiery X4 jobs.

The functions you perform on the Novell server, on the Fiery X4, and on the client 
workstation, are summarized in the following tables. The first table applies to NDS 
connections, the second to bindery connections. Complete the operations in the left 
column, then the center column, then the right column.