AR-PE1 (serv.man12). ARPE1 Configuration Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 109

The remaining options are found only in remote Setup. To change them with local 
Setup, use the Network Control Panel in Windows NT.

—The server name is the name that will appear on the network. It can, 

but does not have to, be the same name as the server name assigned to the Fiery X4 
(see page 4-4).

—You can enter information about the printer, up to 15 characters. These 

comments are listed in the Properties of the Fiery X4 in Network Neighborhood. 
Lowercase letters are allowed in this field.

—Enter the workgroup or domain where the Fiery X4 should 

appear. 

—Enter the IP address of the Ethernet WINS name server. 

—Enter the IP address of the Token Ring WINS name server.

Broadcasts from SMB devices cannot be routed beyond their original network segment 
without a WINS name server. Setting up the WINS name server is outside the scope of 
this manual. To find out if a name server is available, contact your network 
administrator.