Read Sharp AR-PB8 (serv.man7) Service Manual online
C. Printer operation panel installation
•
Engage two pawls and fix the printer operation panel with one
screw.
Then connect the flat cable to the connector.
screw.
Then connect the flat cable to the connector.
2. Procedures on the copier (rear side)
A. Copier rear cabinet disassembly
•
Remove seven screws and remove the rear cabinet.
B. Copier shield plate disassembly
•
Remove six screws, and remove the shield plate.
C. PWB fixing plate installation
•
Fix the plate with four screws.
D. Printer PWB or Fax PWB installation
•
Refer to the Rach service manual.
E. Mother board installation
•
Insert the connectors and fix them, then connect the connec-
tors of the copier to them.
tors of the copier to them.
F. Shield plate installation
•
Fix the shield plate with six screws.
G. PWB cover installation
•
Install the PWB cover with 14 screws.
AR-PA1
1 – 2
Click on the first or last page to see other AR-PB8 (serv.man7) service manuals if exist.