Read Sharp AR-PB8 (serv.man22) Technical Bulletin online
DCE424
Sharp Electronics (UK) Ltd., Technical Services Group
Current parts
New parts
N
o
Model
name
Versio
n
P/G
No.
Parts code
Parts code
Pric
e
k
Q't
y
Parts name
Effec-
tive
time
Inter-
change
-
ability
Note
1
AR-PB8
ALL
2 -9
TLABS0209GCZZ
-
-
1
CE mark label
Runnin
g
change
from
'02/9
'02/9
4
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
(Additional explanation)
1.New type PCL PWB unit is established as the service part.
Also, newly added parts are provided as the service parts. (Both of old and new parts
excluding old flash memory are provided.)
(How to identify old and new PCL unit.)
It is identified by the silk printing on the surface of PCL PWB.
PCL PWB unit
Silk printing
Old type
X0034QS-3
New type
X0034QS-6 or X0034QS-9
2. Between old and new flash memory, there is no interchangeability (numbers of pin are
different, so attachment is impossible.)
If the Flash memory in Old type PCL PWB unit requires replacement, please note that
the PWB should be replaced to New type PCL PWB unit (in the case of no stock of Old
type Flash memory).
PCL PWB unit
Old type Flash memory
New type Flash memory
Old type
(Silk printing : X0034QS-3)
○
×
New type
(Silk printing : X0034QS-6 , 9)
×
○
Note : There are two types of New type flash memory (BOOT/PCL) - E type and O type.
However, those are same flash memory. Only the labels for firmware and version are different.
However, those are same flash memory. Only the labels for firmware and version are different.
Display
