Read Sharp AR-PB2 (serv.man7) User Guide / Operation Manual online
PRINTING FROM A COMPUTER
12
1. Ensure that the printer cable is connected between your computer and the printer and then turn on
your computer.
2. Insert the printer driver diskette for the PPD driver for Windows 95/Windows 98 into the floppy disk
drive.
3. On the Windows 95/Windows 98 Start menu, select ‘Run’.
4. Type
A:\PFMSETUP (if the floppy disk drive is designated as drive A) and click the ‘OK’ button.
5. Follow the instructions on your screen to install the resident font information.
6. When the installation is complete, restart Windows.
Printing a Test Page from Your Computer
This section describes how to print a test page from your computer. Printing a test page verifies
that the printer and your computer are connected correctly.
that the printer and your computer are connected correctly.
Windows 95, Windows 98 or Windows NT 4.0
Users of Windows 95, Windows 98 or Windows NT 4.0 will be prompted to print a test page when installing their
selected printer driver(s). Otherwise, follow the procedures given below.
1. If necessary, install the appropriate printer driver(s). Refer to ‘Installing Printer Drivers’ for specific
instructions.
2. From the Windows desktop, click on ‘Start.’
3. Highlight ‘Settings’ and then click on ‘Printers.’
4. Right click on the Sharp printer icon and then click on ‘Properties.’
5. Click on ‘Print Test Page.’
6. Follow the instructions on the screen to finish printing the test page.
Windows 3.1x
1. If necessary, install the appropriate printer driver(s). Refer to ‘Installing Printer Drivers’ for specific
instructions.
2. Print a test page or test document using one of your installed word processing programs such as
Notepad.
Refer to Chapter 4 on Operation Panel to make sure the printer is ready and on-line to print the document.
NOTE
NOTE
Click on the first or last page to see other AR-PB2 (serv.man7) service manuals if exist.