AR-PB2 (serv.man7). Revised ARPB2 Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 15

•

 

If you use Windows 95 on a personal computer with the plug & play feature, the ‘Update
Device Driver Wizard’ window will appear. If the ‘New Hardware Found’ window appears,
follow the procedure below:

➀

  Click the ‘Driver from Disk Provided by Hardware Manufacturer’ button and then click ‘OK’.

➁

  When the ‘Install From Disk’ window appears, insert the desired diskette into the floppy disk

drive. Type A:\ (if the floppy disk drive is designated as drive A) and click the ‘OK’ button.

➂

  Proceed to step 4.

•

 

If either the ‘Update Device Driver Wizard’ window or the ‘New Hardware Found’ window
does not appear, follow the procedure of Windows 95/Windows 98 without Plug & Play.

3.   Insert the desired diskette into the floppy disk drive and click the ‘Next’ button.

4.   Highlight the desired printer driver and click ‘Next’ to continue.

5.   Ensure that ‘Yes’ is checked to use the printer as the default printer. Click the ‘Next’ button.

6.  Follow the instructions on your screen to install the supplied printer driver.

In step 4 above, selecting ‘SHARP AR-PB2 PS’ (the PostScript® driver) will generally provide the highest-quality

output and support the widest range of printer features. Alternatively, select either the SHARP AR-PB2 PS PPD (Sharp-
specific PostScript® PPD) or the SHARP AR-PB2 PCL5e driver.

When using Windows 98 with plug & play*, follow the procedure below.

* The plug & play feature is effective if both the computer and peripheral equipment are equipped

with IEEE 1284 compliant parallel interface.

 

1.  Ensure that the printer cable is connected between your computer and the printer and then turn on

the printer.

2.  Start Windows on your computer.

Before installing the printer driver, be sure to close all other open applications.

•

  If you use Windows 98 on a personal computer with plug & play feature, the ‘Add New

Hardware Wizard’ window will appear. If the ‘Add New Hardware Wizard’ window does not
appear, follow the procedure of Windows 95/Windows 98 without Plug & Play.