Read Sharp AR-P350 / AR-P450 (serv.man54) Technical Bulletin online
ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
[Details on upgraded user interface]
1. Line Thickness
This function is used to adjust the line thickness of the vector graphics for printing.
Note) Normally, there is no need to change the line thickness because it is defined by the
printer core.
However, this function would be useful for CAD or other particular purposes where
adjusting the line thickness is required.
The list below shows the relationship between the setting value and the enlargement ratio
of line thickness.
Note) Normally, there is no need to change the line thickness because it is defined by the
printer core.
However, this function would be useful for CAD or other particular purposes where
adjusting the line thickness is required.
The list below shows the relationship between the setting value and the enlargement ratio
of line thickness.
For example, when the Line Thickness is set to “4”, the thickness of the printed line will be
0.95 times as thick as the standard thickness defined by the printer core. When the
setting is 9, the result will be 1.5 times as thick as the standard thickness, and so forth. It
should be noted that each line will be printed as “1 dot line” when it is set to 0.
0.95 times as thick as the standard thickness defined by the printer core. When the
setting is 9, the result will be 1.5 times as thick as the standard thickness, and so forth. It
should be noted that each line will be printed as “1 dot line” when it is set to 0.
Setting
0
1
2
3
4
5
6
7
8
9
Enlargement ratio
All 1dot
0.5
0.75
0.9
0.95
1
1.05
1.10
1.25
1.5
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man54) service manuals if exist.