AR-NS2 (serv.man3). AR-C260M Scanner Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 40

This is used to change the default resolution
setting for transmission in network scanner mode.
The default resolution is initially set to "LOWER".
To change the setting, touch the desired resolution
key.
● [LOWEST]

(B/W: 150 x 150dpi, Colour: 100 x 100dpi)

● [LOWER]

(B/W: 200 x 200dpi, Colour: 150 x 150dpi)

● [STANDARD]

(B/W: 300 x 300dpi, Colour: 200 x 200dpi)

● [HIGHER]

(B/W: 400 x 400dpi, Colour: 300 x 300dpi)

● [HIGHEST]

(B/W: 600 x 600dpi, Colour: --- ---)

This program is used to set the volume of the beep
sound that informs you that the original has been
scanned. Two volume levels are available, or the
beep can be turned off.

If you do not select a sender when performing a
Scan to E-mail operation, the sender information
stored with this setting is automatically used. You
can check the stored sender information by printing
the SENDER list.

The sender name entry screen appears
Up to 20 characters can be entered.

Up to 64 characters can be entered.

The entered return address appears. Check the
address to make sure it is correct.

This setting selects the compression mode for
broadcasting using Scan to E-mail. The
compression mode set here is used for all
destinations regardless of their individual
compression mode settings. 
The initial settings are as follows:
● Black and white scanning: MMR (G4)
● Colour scanning: MIDDLE COMP

These programs are used to set the file format of
the transmitted image and the number of images
per file.
● The file type and compression mode is set in

"FILE FORMAT (FILE TYPE / COMPRESSION
MODE)". The setting takes effect in the following
situations:

• A file format is not selected when sending a

image.

• A file format setting was not included when the

destination was stored.

• If the file format is set when sending an image

or storing a destination, the settings apply to
the default file format settings.

● The "ONE PAGE PER FILE (YES/NO)" setting

is used to select how files are created when
multiple pages are scanned. Select "YES" to
have an individual file created for each scanned
page (so that multiple files are created). Select
"NO" to have all scanned pages combined into a
single file.

● The initial settings for the above programs are

as follows

• Black and white scanning

File type: PDF
Compression mode: MMR (G4)
One page per file: No

• Color scanning

File type: PDF
Compression mode: MIDDLE COMP
One page per file: No

To prevent the size of image files transmitted by
Scan to E-mail from becoming too large, you can
set a size limit.
If the size of the image file created by scanning the
original exceeds the limit, the image file is
discarded. The limit can be set from 1 MB to 10 MB
in increments of 1 MB. The initial setting is 2 MB.
The limit cannot be disabled.