Read Sharp AR-NS1 (serv.man4) User Guide / Operation Manual online
Chapter 2 Getting Started
6
E-mail Setup and Network Scanning Setup
In the E-mail scanning destination, SMTP (Simple Mail Transport Protocol) protocol is used to send
the e-mails. This section describes how to set up the basic status of the e-mail sending including the
definition of the file names for the image data to be attached and so on. Such settings must be
effected by the system administrator who has the special network related backgrounds.
the e-mails. This section describes how to set up the basic status of the e-mail sending including the
definition of the file names for the image data to be attached and so on. Such settings must be
effected by the system administrator who has the special network related backgrounds.
1
Open a web browser such as Netscape Navigator 4.0 and later or Internet Explorer 4.0 and
later.
later.
2
Input the IP Address previously specified to the ADDRESS field of the browser.
Input the IP address specified in the printer expansion kit AR-PB2 A. (For checking the IP address, refer
to the part of “Identifying the Copier’s Network Address” on page 2.)
When the connection is completed, the Machine Information Page shown below will be displayed. This
page displays a navigation bar for accessing other internal web pages that allows to get overall device
status information .
to the part of “Identifying the Copier’s Network Address” on page 2.)
When the connection is completed, the Machine Information Page shown below will be displayed. This
page displays a navigation bar for accessing other internal web pages that allows to get overall device
status information .
3
Click on the Scan button.
This brings up the Network Scanning Management web page. This page functions as main
page for adding, deleting and modifying scanning destinations.
This brings up the Network Scanning Management web page. This page functions as main
page for adding, deleting and modifying scanning destinations.
4
Click on the E-mail Setup button.
Click on the first or last page to see other AR-NS1 (serv.man4) service manuals if exist.