Read Sharp AR-NS1 (serv.man4) User Guide / Operation Manual online
Chapter 2 Getting Started
13
Setting up Desktop Destination Control
When you press the Scan to Desktop button in the step 5 of page 10, the screen shown below
appears. As the Desktop Destination Control for the Scan to Desktop is to be set up when
Sharpdesk (Network Scanner Tool) is installed (or after the installation) in the destination PC as
described on page 28, you do not need to set it up again in this screen. In such a case, however,
as you add another digital copier equipped with the AR-NS1 in the same network to do the
Scan to Desktop to the same destination registered in the current digital copier, you should
set up the Desktop Destinations from this page.
appears. As the Desktop Destination Control for the Scan to Desktop is to be set up when
Sharpdesk (Network Scanner Tool) is installed (or after the installation) in the destination PC as
described on page 28, you do not need to set it up again in this screen. In such a case, however,
as you add another digital copier equipped with the AR-NS1 in the same network to do the
Scan to Desktop to the same destination registered in the current digital copier, you should
set up the Desktop Destinations from this page.
For the setting, select the desired Destination Profile for the Scan to Desktop in the step 4 of page 9 and enter
the same contents of the screen then appears to the setting screen, shown below, of the added machine. When
you have entered all the items, click the Submit button to register the information. If you have multiple
Destinations to transfer, repeat these steps by necessary times. Up to 100 destinations can be stored in
conjunction with the other 2 Destinations.
the same contents of the screen then appears to the setting screen, shown below, of the added machine. When
you have entered all the items, click the Submit button to register the information. If you have multiple
Destinations to transfer, repeat these steps by necessary times. Up to 100 destinations can be stored in
conjunction with the other 2 Destinations.
Item
Description
Desktop Destination
Name
Name
Enter a name of the destination to be registered here. The name appears
on the copier’s front panel.
on the copier’s front panel.
Host Name or IP
Address
Address
Enter the IP address or DNS name of the destination PC here. (When
DNS name is entered, a DNS server is required to have been set in the E-
mail Setup and Network Scanning Setup screen (see page 7).
DNS name is entered, a DNS server is required to have been set in the E-
mail Setup and Network Scanning Setup screen (see page 7).
Desktop Port Number
Enter a port number to be used for data transfer on the destination PC
here. (The default port number is set to 21.)
here. (The default port number is set to 21.)
Process Directory
Enter the process directory name set in the destination PC here. A
process, which is to be automatically run upon arrival at the destination
PC, has been assigned to this directory. (See step 3 of page 30.)
process, which is to be automatically run upon arrival at the destination
PC, has been assigned to this directory. (See step 3 of page 30.)
NOTE
Entering (and correcting or deleting) of a Desktop Destination Control can be done by using the Setup Wizard
of the Network Scanner Tool, which is optionally installed at the installation of the Sharpdesk. (See page 28.)
Nevertheless, deleting of the stored Desktop Destinations can also be done from the Network Scanner
Management web page. (Refer to the step 4 of page 9.)
of the Network Scanner Tool, which is optionally installed at the installation of the Sharpdesk. (See page 28.)
Nevertheless, deleting of the stored Desktop Destinations can also be done from the Network Scanner
Management web page. (Refer to the step 4 of page 9.)
Click on the first or last page to see other AR-NS1 (serv.man4) service manuals if exist.