Read Sharp AR-NC5J Service Manual online
AR-NC5J/NC5JG/NC5JW - 5
D. AppleTalk and related items
E. NetBEUI and related items
Login Password Login Password Login Password No (No password)
Used to set the password authenticated when the AR-NC5J logs in
the file server as a print server. The password can be set in max. 31
characters. However, it is not recommendable to use Chinese
characters and Katakana character in a password. When a password
is set for the AR-NC5J, the same password must be set to the
corresponding file server. (Setup of a password on the file server is
made from "Print server information.") When connecting to two or
more file servers, the same password must be set to all of them.
* Note: The AR-NC5J uses a null character array for the default
password. That is, even though a password is set to the AR-NC5J and
no password is set to the print server information (a null character
array is set), connection and printing are allowed. This, however, is an
exceptional process. In the normal process, the password set to the
AR-NC5J must be identical to that for the print server information.
the file server as a print server. The password can be set in max. 31
characters. However, it is not recommendable to use Chinese
characters and Katakana character in a password. When a password
is set for the AR-NC5J, the same password must be set to the
corresponding file server. (Setup of a password on the file server is
made from "Print server information.") When connecting to two or
more file servers, the same password must be set to all of them.
* Note: The AR-NC5J uses a null character array for the default
password. That is, even though a password is set to the AR-NC5J and
no password is set to the print server information (a null character
array is set), connection and printing are allowed. This, however, is an
exceptional process. In the normal process, the password set to the
AR-NC5J must be identical to that for the print server information.
Job Polling
(sec)
(sec)
Job Polling
interval (sec)
interval (sec)
Job Polling
interval
interval
4
Used to specify the time interval (sec) between job inquiries from the
AR-NC5J to the filer server. Normally there is no need to change the
default setup, 4sec.
AR-NC5J to the filer server. Normally there is no need to change the
default setup, 4sec.
Bindary Mode
Bindary Mode
Bindary setup
ENABLE
Used to disable/enable the bindary mode operation. When disabled,
only the NDS mode operation is valid. This is set to DISABLE only
when only the NDS mode is used.
only the NDS mode operation is valid. This is set to DISABLE only
when only the NDS mode is used.
FSERVER
Name 1 – 8
Name 1 – 8
File server
name 1 – 8
name 1 – 8
Filer server
name to be
connected
name to be
connected
""
Used to set the priority file server name with max. 31 characters.
When operating in the print server mode, the file server specified in
this setup is logged in. If this setup is empty, the AR-NC5J
automatically retrieves a file server to log in.
When operating in the print server mode, the file server specified in
this setup is logged in. If this setup is empty, the AR-NC5J
automatically retrieves a file server to log in.
NDS Tree
NDS Tree name NDS Tree name ""
Used to set the NDS tree to be connected. Since it is automatically
acquired, there is no need to set in normal cases. If there are two or
more trees in a network, it must be set.
acquired, there is no need to set in normal cases. If there are two or
more trees in a network, it must be set.
NDS Context
NDS Context
NDS Context
""
Used to set the NDS context connected in the print server mode. In
this item, the context which formed the print server on the file server is
set.
this item, the context which formed the print server on the file server is
set.
PSERVER
Name 1 – 8
Name 1 – 8
Print Server
name 1 – 8
name 1 – 8
Print Server
name to be
connected
name to be
connected
""
Used to set the print server name to be connected in priority. When
operating in the remote printer mode, connection is made to the print
server set in this setup. If this setup is empty, the AR-NC5J
automatically retrieves a print server to connect.
operating in the remote printer mode, connection is made to the print
server set in this setup. If this setup is empty, the AR-NC5J
automatically retrieves a print server to connect.
Job Timeout
(sec)
(sec)
Job Timeout
(sec)
(sec)
Job Timeout
10
Used to set the timeout for the AR-NC5J to judge the completion of a
job when operating in the remote printer mode. Usually the default
value is used.
job when operating in the remote printer mode. Usually the default
value is used.
Name
Factory setup
Descriptions
Telnet
Web page
NIC Manager
AppleTalk
Protocol
Protocol
AppleTalk
Protocol
Protocol
Use AppleTalk
Protocol.
Protocol.
ENABLE
Used to disable/enable the AppleTalk protocol operation.
Zone Name
Zone Name
Zone Name
"*"
Used to set the zone name which the AR-NC5J belongs to. If this
setup is "*", The AR-NC5J belongs to the default zone set in the
AppleTalk router in the network.
setup is "*", The AR-NC5J belongs to the default zone set in the
AppleTalk router in the network.
Printer Name
Printer Name
Printer Name
"SCxxxxxx" (xxxxxx is
the lower 6 digits of
Mac address.)
the lower 6 digits of
Mac address.)
Used to set the AppleTalk printer name. The set printer name is visible
from the selector. The special codes (=:@*) of the AppleTalk protocol
cannot be used in this character array.
from the selector. The special codes (=:@*) of the AppleTalk protocol
cannot be used in this character array.
Name
Factory setup
Descriptions
Telnet
Web page
NIC Manager
NetBEUI
Protocol
Protocol
NetBEUI
Protocol
Protocol
Use NetBEUI
Protocol.
Protocol.
ENABLE
Used to disable/enable the NetBEUI protocol operation.
Computer
Name
Name
Computer
Name
Name
Computer name "SCxxxxxx" (xxxxxx is
the lower 6 digits of
Mac address.)
Mac address.)
Used to set the computer name. The set name is displayed in
Window's Explorer. The name must be different from the other
computer names.
Window's Explorer. The name must be different from the other
computer names.
Work Group
Work Group
Work Group
"Sharp-Printer"
Used to set the work group which the AR-NC5J belongs to. Use the
default work group name or an existing work group name. A new work
group name which does not exist in the network cannot be displayed
as a work group.
default work group name or an existing work group name. A new work
group name which does not exist in the network cannot be displayed
as a work group.
Comment
Comment
Comment
"Sharp AR-NC5J"
Used to set the comment on the AR-NC5J. The set contents are
displayed as the comment on the AR-NC5J by Window's Explorer.
displayed as the comment on the AR-NC5J by Window's Explorer.
Name
Factory setup
Descriptions
Telnet
Web page
NIC Manager
Click on the first or last page to see other AR-NC5J service manuals if exist.