Read Sharp AR-NC5J (serv.man9) User Guide / Operation Manual online
3-4
Using in Windows Environment
Print Server Card
Users Manual
Setup Print Server Card
Use NICManager of Print Server Card User Software to set up Print Server Card. Start
NICManager. You will see the list of Print Server Card in the network. You can search by
going to
File and selecting Search.
* The NIC which has not been set is high lighted in the list.
* You can install NICManager from Standard Setup of the CD-ROM.
* Some parameters can be set from a printer. Please refer to the manuals of printer for the
details.
* Before setting Print Server Card, check the Ethernet address of Print Server Card. Ethernet
address is 6 sets of the hexadecimal two digit number written in the seal put on Print Server
Card.
(Ex. : 00.80.92.00.13.67)
1.
Select Print Server Card you want to set up from the list. Go to
Setup and select
Print Server Card Setup.
Password will be shown. You need to type a password and click OK. Print Server
Card Setup will open.
* Password in Factory default is
Sharp.
* You can see the configuration by selecting
Guest user but you can not change the
parameters.
TIP
TIP
NOTE
Click on the first or last page to see other AR-NC5J (serv.man9) service manuals if exist.