Read Sharp AR-NC5J (serv.man2) User Guide / Operation Manual online
10
Appendix
Print Server Card
Users Manual
About NetBEUI
This section explains how to print using NetBEUI protocol.
When you connect Print Server Card to the network you will see
Sharp-Printer Workgroup in Entire Network
of
Network Neighborhood. In the workgroup a printer and a computer (Print Server Card) with two folders will
be added. You can add printer, change printer status, set up, connect to HTTP server through this computer
(Print Server Card). Depending on printer, you may see message of writing error with NetBEUI printing in
that case. If there is a problem, use TCP/IP protocol.
Examples
* Tried to print while the printer was off line.
* Tried to print when paper was out.
* Tried to print when another machine tried to print using NetBEUI.
* Tried to print while using another protocol.
* Error occurred while printing.
During the above situation you will see an error message. If you have problems, use TCP/IP protocol.
Sharp-Printer Structure
\\SC001141
:Computer (Print Server Card)
\\SC001141\LPT
:Printer
\\SC001141\report\Report.txt
:Setup Report (Read only)
\\SC001141\report\Status.txt
:System Status Report (Read only)
\\SC001141\setup\WebSetup
:Short Cut File (Read only)
Setup Report
Reports Print Server Card's configuration status when power is turned on.
System Status Report
When this folder is opened, reports Print Server Card's status.
Click on the first or last page to see other AR-NC5J (serv.man2) service manuals if exist.