Read Sharp AR-NC3D (serv.man23) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 005.doc
Page: 3 of 5
Use the keypad to enter the four octets in the IP address and use the arrow keys (light/dark)
to move between octets. Do the same procedure to enter the Subnet and Gateway
addresses. Hit OKAY three times when done to return to the main menu.
to move between octets. Do the same procedure to enter the Subnet and Gateway
addresses. Hit OKAY three times when done to return to the main menu.
Enter the IP address for the ARNC1D/3D and PORT1 for the print queue name on the PC.
“PORT1” should always be used and set in capitals for the printer queue name on the
ARNC1D/3D. When finished, click OK, and then click Close. Click Next to go to the next page in
the Wizard.
“PORT1” should always be used and set in capitals for the printer queue name on the
ARNC1D/3D. When finished, click OK, and then click Close. Click Next to go to the next page in
the Wizard.
8. The next step is to load the Sharp Print Driver. Click Have Disk and insert the Sharp Windows
Driver diskette into the floppy disk drive:
9. Double Click on the Sharp specific PPD (Sharp ARPB2). This will begin the file transfer of the
necessary files from the floppy drive to the NT system area:
Click on the first or last page to see other AR-NC3D (serv.man23) service manuals if exist.