Read Sharp AR-NC3D (serv.man14) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 4 of 17
8.
Make sure that the Sharp copier is powered on and connected to the network. Click
Next
Next
9.
Use the following steps to check / set an IP address and subnet address on the
ARNC1D/3D network interface card.
ARNC1D/3D network interface card.
With the AR-PB2/+ and the ARNC1D/3D installed in the copier, press the following
keys on the copiers operation panel, in the order shown.
keys on the copiers operation panel, in the order shown.
PRINT -> OFFLINE-> MENU-> NETWORK-> SETTING-> IP ADDRESS SETTING
Use the keypad to enter the four octets in the IP address and Subnet Mask. A
Gateway addresses may also be required in a larger scale network. Hit OK three
times when done to return to the main menu.
Click on the first or last page to see other AR-NC3D (serv.man14) service manuals if exist.